Basel braided leather dog collar
Basel is a customisable dog collar made from braided cowhide leather. Its plate can display a name or telephone number.
It comes in brown and gold or black and silver. Six catalogue sizes cover 40 to 65 cm.
This personalised leather dog collar belongs to the leather dog collar collection. It suits daily walks when its adjustment is checked.
Basel braided leather: material and construction
The manufacturer describes cowhide leather with a braided strip. This braid creates an even texture across the outside.
Leather loops hold the strap near the buckle. Check their stitching and the leather edges before walking.
This product does not claim a full-grain finish. The leather finishes guide explains that term without assigning it to Basel.
What can be engraved on the plate
The plate carries a short name or telephone number. Choose useful information if the dog wanders.
Concise engraving stays readable. Review every character in the configurator before approving this personalised dog collar.
Collar sizes and adjustment
Available sizes are 40, 45, 50, 55, 60 and 65 cm. Smart Wag does not publish their neck ranges. Measure the dog before ordering.
How to measure your dog’s neck
Place a soft tape where the collar normally rests. Keep the dog standing and the tape level.
Slide two flat fingers under the tape. After delivery, seek a central hole and check that the collar cannot cross the ears.
Available size chart
The chart lists the six verified references. Use the real measurement and request confirmation between two options.
| Catalogue size | Measurement to compare | Target position | Final check |
|---|---|---|---|
| 40 cm | Real measurement | Central hole | Two flat fingers |
| 45 cm | Real measurement | Central hole | Two flat fingers |
| 50 cm | Real measurement | Central hole | Two flat fingers |
| 55 cm | Real measurement | Central hole | Two flat fingers |
| 60 cm | Real measurement | Central hole | Two flat fingers |
| 65 cm | Real measurement | Central hole | Two flat fingers |
Complete your tack set
The Basel collar repeats the braided leather of the St Moritz headcollar and Basel bridle. Match their colours for a coordinated horse-and-dog set.
| Product | Braided finish | Personalisation | Use |
|---|---|---|---|
| Basel collar | Braided leather strip on the collar | Engraved plate where offered | Daily dog walks |
| St Moritz headcollar | Matching braided leather details | Engraving selected on its product page | Horse handling under its product guidance |
| Basel bridle | Matching braided leather details | Engraving selected on its product page | Ridden work with a bit after fitting |
The St Moritz headcollar matching Basel
The St Moritz headcollar uses the same braided leather. Match leather and hardware, then measure the horse separately. Configure its engraving on its own page.
The Basel bridle matching the collar
The Basel bridle completes the set for ridden work. Its finish echoes the collar, but its fitting points remain horse-specific. Check each item separately.
Caring for braided leather
Remove dust with a slightly damp cloth. Clean the braid recesses without soaking the leather. Dry at room temperature, away from sunlight and direct heat.
Apply a small amount of compatible conditioner. Avoid the plate and hardware. The leather care guide explains each step. For another tag, open the dog collar nameplate page.
Frequently asked questions about the Basel collar
Which Basel collar size should I choose?
Measure the neck with two fingers under the tape. Compare that value with the 40 to 65 cm sizes before ordering.
What can be engraved on the collar plate?
The plate can hold short information, such as the dog’s name or a telephone number. Review every character before approval.
How should I care for the braided leather?
Remove dust with a damp cloth, clean the recesses gently and dry without direct heat. Apply a small amount of suitable leather care.
