Description
A comfortable and elegant customisable leather side jumper
A customisable side pull in high-quality leather. The cowhide leather, lined and padded on the anatomical headpiece and noseband, guarantees optimum comfort for the horse.
A customisable side pull
For greater adaptability and practicality, the Verbier custom bitless leather bridle has an adjustable noseband on both sides.
The Verbier personalised side pullover is available in black or brown leather with silver buckles.
It's available in PONEY to FULL sizes to suit a wide range of body sizes.
The Verbier sidepull can be personalised with engraving on a silver plate in the same colour as the buckle.
Precautions for use:
This product is not suitable for use in hand or under constant tension. It will normally give way if the horse pulls at the tack, in hand, gets a rein stuck in a limb or under heavy tension. It should only be used with horses that have been thoroughly trained in the use of the bitless system.
A little Smartwag advice: Our bridles run slightly small, so if in doubt, take the next size up. You can find the measurements below. If the chosen size does not fit, an exchange is possible depending on available stocks (at the buyer's expense).
The total look
The Verbier sidepull can be complemented with a pair of Slip reins .
Smart Wag maintenance tips :
For a new leather :
Your new leather Smart Wag sidepull still has all its natural moisture and doesn't need to be rehydrated with glycerine soap.
On the contrary, this maintenance product could alter the colour of leathers having a natural finish (aniline), especially the brown or havana leathers.
Vous pouvez cependant assouplir les parties » non critiques » comme les montant de filet et de muserolle avec un peu d’huile et la laisser sécher ( dans un endroit sec et ombragé).
Pour un bridon déjà utilisé:
A chaque utilisation, enlevez la poussière avec un petit chiffon. Il n’est pas nécessaire d’utiliser un produit d’entretien après chaque utilisation. Au contraire certains produits de nettoyage à base d’agents de surface anionique peuvent abimer le vernis de votre bridon. Veillez à utiliser des produits aux composants doux et à éviter au maximum de frictionner votre cuir durant le nettoyage.
Il est recommandé de nettoyer votre bridon une fois par mois avec un savon glyceriné (à composition non détergente) .
Additional information
| Weight |
0.700 kg |
| Leather color |
Brown with silver buckles, Black with silver buckles
|
| Size |
PONEY (Pony), COB (Pony D, Pure Blood), FULL (Horse), XFULL (Great Horse)
|
A comfortable and elegant customisable leather side jumper
A customisable side pull in high-quality leather. The cowhide leather, lined and padded on the anatomical headpiece and noseband, guarantees optimum comfort for the horse.
A customisable side pull
For greater adaptability and practicality, the Verbier custom bitless leather bridle has an adjustable noseband on both sides.
The Verbier personalised side pullover is available in black or brown leather with silver buckles.
It's available in PONEY to FULL sizes to suit a wide range of body sizes.
The Verbier sidepull can be personalised with engraving on a silver plate in the same colour as the buckle.
Precautions for use:
This product is not suitable for use in hand or under constant tension. It will normally give way if the horse pulls at the tack, in hand, gets a rein stuck in a limb or under heavy tension. It should only be used with horses that have been thoroughly trained in the use of the bitless system.
A little Smartwag advice: Our bridles run slightly small, so if in doubt, take the next size up. You can find the measurements below. If the chosen size does not fit, an exchange is possible depending on available stocks (at the buyer's expense).
The total look
The Verbier sidepull can be complemented with a pair of Slip reins .
Smart Wag maintenance tips :
For a new leather :
Your new leather Smart Wag sidepull still has all its natural moisture and doesn't need to be rehydrated with glycerine soap.
On the contrary, this maintenance product could alter the colour of leathers having a natural finish (aniline), especially the brown or havana leathers.
Vous pouvez cependant assouplir les parties » non critiques » comme les montant de filet et de muserolle avec un peu d’huile et la laisser sécher ( dans un endroit sec et ombragé).
Pour un bridon déjà utilisé:
A chaque utilisation, enlevez la poussière avec un petit chiffon. Il n’est pas nécessaire d’utiliser un produit d’entretien après chaque utilisation. Au contraire certains produits de nettoyage à base d’agents de surface anionique peuvent abimer le vernis de votre bridon. Veillez à utiliser des produits aux composants doux et à éviter au maximum de frictionner votre cuir durant le nettoyage.
Il est recommandé de nettoyer votre bridon une fois par mois avec un savon glyceriné (à composition non détergente) .
